top of page
CEOS SERIES
CEOS SERIES
Upfloor heavy duty wheel lathes
This stroke can vary based on the railway width (gauge width)
If gauge width is 1.435 [mm],
the stroke is of 930 [mm]
European Norms 2006/42/CE
< 80 [dBA]
Max 100 [kVA] Will depend on the final lay-out
Max 300 [kN] depending on the chosen options
600 [mm]
(May vary depending on the wheel OD range requested)
1.000 - 1.676 [mm]
Adaptable gauge width – railways width
Other width can be considered – Upon request
Wheel Outside Diameter
540 - 1.450 [mm]
Max load per wheel set
50 [kN] - 5 [t]
Series of Wheel Sets that can be machined
With external bearing boxes
With internal bearing boxes
With or Without brake disc
Max chip size
From 0 to more than 10 [mm²]
Monolithic wheels
Monolithic wheels with conical or corrugated rim
Wheels with flanged brake discs
Series of Wheels that can be machined
Series of brake discs
- Monolithic discs fixed on the shaft
- Sectored discs fixed on the shaft
- Monolithic discs flanged on the inside or on the outside of the wheel
- Sectored discs flanged on the inside or on the outside of the wheel
It is possible to machine the brake disks on the CEOS machines, but considering the wide variety of wheel sets (with or without bearing boxes, with or without gear boxes,...) : it is impossible for us to garantee upfront all possible cases.
Vertical Stroke
Longitudinal Stroke
Machine Alone - Weight
Installed Power
Noise Level
Used Standards
bottom of page